Civil Engineering Multiple Choice Questions and Answers- Design of Structures Steel (WSM & LSM)

 Disclaimer:

This document does not claim any originality and cannot be used as a substitute for prescribed textbooks. I would like to acknowledge various sources like freely available materials from internet particularly NPTEL/ SWAYAM course material from which the lecture note was prepared. The ownership of the information lies with the respective authors or institutions. Further, this document is not intended to be used for commercial purpose and the BlogSpot owner is not accountable for any issues, legal or otherwise, arising out of use of this document.

Design of Structures Steel LSM

1. The nomenclature ISHB stands for;

a) Indian Standard Junior Beams

b) Indian Standard Medium Weight Beams

c) Indian Standard Heavy Weight Beams

d) Indian Standard Wide Flange Beams 

Answer: (c)

2. Limit State Method is based on _____________

a) calculations on service load conditions alone

b) calculations on ultimate load conditions alone

c) calculations at working loads and ultimate loads

d) calculations on earthquake loads

Answer: (c)

3. The minimum size of weld required to connect two plates of thickness 8 mm and 14 mm in lapping is

a) 3 mm

b) 6.5  mm

c) 10.5 mm

d) 8 mm

Answer: (a)

References

https://www.examveda.com/

https://www.sanfoundry.com/

https://www.indiabix.com/